Chapter 2 SCPI Device Message Details
2-484
[:SENSe]:CHPower:BANDwidth:INTegration <freq>
Channel Power Channel Bandwidth
Function
This command sets the channel bandwidth for Channel Power
measurement.
Command
[:SENSe]:CHPower:BANDwidth:INTegration <freq>
Parameter
<freq>
Channel bandwidth
Range 1 Hz to 2.5 GHz
Resolution 1 Hz
Suffix code HZ,KHZ,KZ,MHZ,MZ,GHZ,GZ
Hz is used when omitted.
Default 3.84 MHz
Example of Use
To set the channel bandwidth to 1 MHz.
CHP:FREQ:INT 1MHZ
Related command
This command has the same function as the following command.
:CALCulate:CHPower:BANDwidth:INTegration
:CALCulate:CHPower:BANDwidth:INTegration <freq>
Channel Power Channel Bandwidth
Function
This command sets the channel bandwidth for Channel Power
measurement.
Refer to
[:SENSe]:CHPower:BANDwidth:INTegration.
Related command
This command has the same function as the following command.
[:SENSe]:CHPower:BANDwidth:INTegration
To Next Page
Loading...
