Anritsu MS2840A - :CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:X <freq>|<time>; :CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:X?

2.10 Burst Average Power
2-467
2
SCPI Device Message Details
:CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:X
<freq>|<time>
Zone Marker Frequency (Time)
Function
This command moves the center of the zone marker to the specified
frequency or time.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:X.
Related command
This command has the same function as the following commands.
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:X
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:X
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10:X
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10:X
:CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:X?
Zone Marker Frequency (Time) Query
Function
This command queries the center of the zone marker.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:X?.
Related command
This command has the same function as the following commands.
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:X?
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:X?
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10:X?
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10:X?