Anritsu MS2840A - [:SENSe]:SPURious:TDOMain[:RANGe][:LIST]:BANDwidth[:RESolution]:COUPle ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0, ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0, ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0, ON|OFF|1|0,...

Chapter 2 SCPI Device Message Detail
2-782
[:SENSe]:SPURious:TDOMain[:RANGe][:LIST]:BANDwidth[:RESolution]:CO
UPle ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0
Spurious Emission Couple Segment RBW
Function
This command sets whether the same as the value set in Segment Setup
is automatically set to RBW Value in Time Domain Setup.
Command
[:SENSe]:SPURious:TDOMain[:RANGe][:LIST]:BANDwidth[:RESo
lution]:COUPle <switch_n>
Parameter
<switch_n>
Shared setting On/Off
ON|1
Sets the shared setting to On.
OFF|0
Sets the shared setting to Off.
Default On
Example of Use
To set whether the same as the value set in Segment Setup is
automatically set to RBW Value in Time Domain Setup.
SPUR:TDOM:BAND:COUP
ON,ON,ON,ON,OFF,OFF,ON,ON,ON,ON,ON,ON,ON,ON,OFF,OFF,ON,O
N,ON,ON