Anritsu MS2840A - CALC:MARK:SLIN;CALC:MARK:SLIN?

Chapter
４
Native Device Message Details
4-51
4
Native Device Message Details
CALC:MARK:SLIN/CALC:MARK:SLIN?
Spot Line
Function
This command displays/hides the marker line in the spot marker.
Command
CALC:MARK:SLIN switch_com
Query
CALC:MARK:SLIN?
Response
switch_res
Parameter
switch_com
Marker line display On/Off
ON|1
Displays marker line.
OFF|0
Hides marker line.
switch_res
Marker line display On/Off
1
Marker line is displayed.
0
Marker line is hidden.
Details
This command is not available during the Spurious Emission
measurement and when Displayed Segment Mode is set to Auto.
This command is disabled during the Spectrum Emission Mask
measurement.
Example of Use
To display the marker line.
CALC:MARK:SLIN ON
CALC:MARK:SLIN?
> 1