Anritsu MS2840A - SPUR;SPUR?

Chapter
４
Native Device Message Details
4-275
4
Native Device Message Details
SPUR/SPUR?
Measure Spurious Emission
Function
This command executes the Spurious Emission measurement.
Command
SPUR switch_com
Query
SPUR?
Response
switch_res
Parameter
switch_com
Spurious measurement On/Off
ON|1
Spurious measurement is enabled.
OFF|0
Spurious measurement is disabled.
switch_res
Spurious measurement On/Off
1
Spurious measurement is enabled.
0
Spurious measurement is disabled.
Details
This command is not available in the following cases:
•
When Scale Mode is set to Lin.
•
In Time Domain mode
When Spurious Emission measurement is set to On, the active trace is
set to A.
Example of Use
To set the Spurious measurement to On.
SPUR ON
SPUR?
> 1