Anritsu MS2840A - [:SENSe]:BPOWer|:TXPower:SWEep:TIME <time>; [:SENSe]:BPOWer|:TXPower:SWEep:TIME?

2.10 Burst Average Power
2-465
2
SCPI Device Message Details
[:SENSe]:BPOWer|:TXPower:SWEep:TIME <time>
Sweep Time
Function
This command sets the sweep time.
Refer to
[:SENSe]:SWEep:TIME.
Related command
This command has the same function as the following commands.
[:SENSe]:SWEep:TIME
[:SENSe]:ACPower:SWEep:TIME
[:SENSe]:CHPower:SWEep:TIME
[:SENSe]:OBWidth:SWEep:TIME
[:SENSe]:BPOWer|:TXPower:SWEep:TIME?
Sweep Time Query
Function
This command queries the sweep time.
Refer to
[:SENSe]:SWEep:TIME?.
Related command
This command has the same function as the following commands.
[:SENSe]:SWEep:TIME?
[:SENSe]:ACPower:SWEep:TIME?
[:SENSe]:CHPower:SWEep:TIME?
[:SENSe]:OBWidth:SWEep:TIME?