Anritsu MS2840A - [:SENSe]:TOI:FREQuency:TUNE:IMMediate; [:SENSe]:TOI:FREQuency:BASE:LOWer <freq>

2.15 Setting the TOI Measurement Functions
2-825
2
SCPI Device Message Details
[:SENSe]:TOI:FREQuency:TUNE:IMMediate
TOI Frequency Auto Tune
Function
This command executes the Auto Tune of the TOI measurement.
Command
[:SENSe]:TOI:FREQuency:TUNE:IMMediate
Example of Use
To execute the Auto Tune of the TOI measurement.
TOI:FREQ:TUNE:IMM
[:SENSe]:TOI:FREQuency:BASE:LOWer <freq>
TOI Lower Tone Frequency
Function
This command sets the lower tone frequency for the TOI measurement.
Command
[:SENSe]:TOI:FREQuency:BASE:LOWer <freq>
Parameter
<freq>
Lower tone frequency for the TOI measurement
Range
[MS269xA]
–100 MHz to 6.05 GHz (MS2690A)
–100 MHz to 13.6 GHz (MS2691A)
–100 MHz to 26.6 GHz (MS2692A)
[MS2830A]
–100 MHz to 3.7 GHz (Option 040)
–100 MHz to 6.1 GHz (Option 041)
–100 MHz to 13.6 GHz (Option 043)
–100 MHz to 26.6 GHz (Option 044)
–100 MHz to 43.1 GHz (Option 045)
[MS2840A]
–100 MHz to 3.7 GHz (Option 040)
–100 MHz to 6.1 GHz (Option 041)
–100 MHz to 26.6 GHz (Option 044)
–100 MHz to 44.6 GHz (Option 046)
Resolution 1 Hz
Suffix code HZ, KHZ, KZ, MHZ, MZ, GHZ, GZ
Hz is used when omitted.
Default