Anritsu MS2840A - :MMEMory:STORe:EVENt:STOP ON|OFF|1|0

Chapter 2 SCPI Device Message Detail
2-1012
:MMEMory:STORe:EVENt:STOP ON|OFF|1|0
Save then Stop
Function
This command sets whether to turn on or off the Save then Stop function
that stops the file save operation once a file is saved by the Save on the
Event function.
Command
:MMEMory:STORe:EVENt:STOP <switch>
Parameter
<switch>
Save then Stop
ON|1
Performs the Save on the Event function only once.
OFF|0
Continuously performs the Save on the Event
function. (Default)
Example of Use
To turn on the Save then Stop function that stops the file save operation
once a file is saved by the Save on the Event function.
:MMEM:STOR:EVEN:STOP ON