Chapter 2 SCPI Device Message Detail
2-812
[:SENSe]:SPURious:SWEep:TIME:AUTO:MODE NORMal|FAST
Spurious Emission Auto Sweep Time Mode
Function
This command sets the Fast/Normal mode when the automatic setting of
the sweep time is set to On.
Refer to
[:SENSe]:SWEep:TIME:AUTO:MODE <mode>.
Related Command
This command has the same function as the following command.
[:SENSe]:SWEep:TIME:AUTO:MODE
[:SENSe]:SPURious:SWEep:TIME:AUTO:MODE?
Spurious Emission Auto Sweep Time Mode Query
Function
This command queries the Fast/Normal mode when the automatic
setting of the sweep time is set to On.
Refer to
[:SENSe]:SWEep:TIME:AUTO:MODE?.
Related Command
This command has the same function as the following command.
[:SENSe]:SWEep:TIME:AUTO:MODE?
To Next Page
Loading...
