Anritsu MS2840A - [:SENSe]:TOI:FREQuency:IM3:SEARch?; :CALCulate:TOI:FREQuency:IM3:SEARch?

2.15 Setting the TOI Measurement Functions
2-843
2
SCPI Device Message Details
[:SENSe]:TOI:FREQuency:IM3:SEARch?
TOI 3rd Frequency Search On/Off
Function
This command queries whether the search function for the third-order
distortion frequency in the TOI measurement is on or off.
Query
[:SENSe]:TOI:FREQuency:IM3:SEARch?
Response
<switch>
Parameter
<switch>
Setting of the search function for the third-order
distortion frequency in the TOI measurement
ON|1
Turns on the search function for the third-order
distortion frequency.
OFF|0
Turns off the search function for the third-order
distortion frequency.
Example of Use
To query whether the search function for the third-order distortion
frequency is on or off.
TOI:FREQ:IM3:SEAR?
> 1
Related Command
This command has the same function as the following command.
:CALCulate:TOI:FREQuency:IM3:SEARch?
:CALCulate:TOI:FREQuency:IM3:SEARch?
TOI 3rd Frequency Correction On/Off
Function
This command queries whether the search function for the third-order
distortion frequency in the TOI measurement is on or off.
Refer to
[:SENSe]:TOI:FREQuency:IM3:SEARch?.
Related Command
This command has the same function as the following command.
[:SENSe]:TOI:FREQuency:IM3:SEARch?