Anritsu MS2840A - SPUR:DET;SPUR:DET?

Chapter
４
Native Device Message Details
4-284
SPUR:DET/SPUR:DET?
Spurious Emission Detection Mode
Function
This command selects the detection mode of the waveform pattern in
each segment.
Command
SPUR:DET
mode_1,mode_2,mode_3,mode_4,mode_5,mode_6,mode_7,mode_8,
mode_9,mode_10,mode_11,mode_12,mode_13,mode_14,mode_15,m
ode_16,mode_17,mode_18,mode_19,mode_20
Query
SPUR:DET?
Response
mode_1,mode_2,mode_3,mode_4,mode_5,mode_6,mode_7,mode_8,
mode_9,mode_10,mode_11,mode_12,mode_13,mode_14,mode_15,m
ode_16,mode_17,mode_18,mode_19,mode_20
Parameter
mode_n
Detection mode of Segment n
NORM
Simultaneous detection of Positive and Negative
peaks
POS
Positive peak detection
NEG
Negative peak detection
SAMP
Sample detection
RMS
RMS detection
Example of Use
To query the detection mode of the waveform pattern in each segment.
SPUR:DET
POS,POS,POS,NEG,NEG,NORM,NORM,RMS,SAMP,POS,POS,POS,POS,P
OS,POS,POS,POS,POS,POS,POS
SPUR:DET?
>
POS,POS,POS,NEG,NEG,NORM,NORM,RMS,SAMP,POS,POS,POS,POS,P
OS,POS,POS,POS,POS,POS,POS