2
SCPI Device Message Details
:CALCulate:MARKer:AOFF
All Marker Off
Function
This command sets all the markers to Off.
Command
:CALCulate:MARKer:AOFF
Details
This command is not available during Spurious Emission measurement
and when Displayed Segment Mode is Auto.
Not available during Spectrum Emission Mask measurement.
Example of Use
To set all the markers to Off.
CALC:MARK:AOFF
Related command
This command has the same function as the following commands.
:CALCulate:ACPower:MARKer:AOFF
:CALCulate:CHPower:MARKer:AOFF
:CALCulate:OBWidth:MARKer:AOFF
:CALCulate:BPOWer|:TXPower:MARKer:AOFF
To Next Page
Loading...
