2
SCPI Device Message Details
Related command
This command has the same function as the following commands.
[:SENSe]:ACPower:BANDwidth[:RESolution]?
[:SENSe]:CHPower:BANDwidth[:RESolution]?
[:SENSe]:OBWidth:BANDwidth[:RESolution]?
[:SENSe]:BPOWer|:TXPower:BANDwidth[:RESolution]?
:CALCulate:BANDwidth|:BWIDth[:RESolution]
:CALCulate:ACPower:BANDwidth[:RESolution]?
:CALCulate:CHPower:BANDwidth[:RESolution]?
:CALCulate:OBWidth:BANDwidth[:RESolution]?
:CALCulate:BPOWer|:TXPower:BANDwidth[:RESolution]?
:CALCulate:BANDwidth|:BWIDth[:RESolution]?
Resolution Bandwidth Query
Function
This command queries the resolution bandwidth (RBW). When Couple
Time/Freq. Domain is set to Off, each parameter is specified in
accordance with the already-specified frequency axis or time axis
measurement.
Query
:CALCulate:BANDwidth|:BWIDth[:RESolution]?
Response
<freq>
To Next Page
Loading...
