Anritsu MS2840A - SWE:EGAT:VIEW:BAND:VID:AUTO;SWE:EGAT:VIEW:BAND:VID:AUTO?

Chapter
４
Native Device Message Details
4-327
4
Native Device Message Details
SWE:EGAT:VIEW:BAND:VID:AUTO/SWE:EGAT:VIEW:BAND:VID:AUTO?
Gate View Video Bandwidth Auto/Manual
Function
This command automatically sets the video bandwidth (VBW) for Gate
View.
This parameter and the one for setting the VBW for time axis
measurement reference the same value.
Command
SWE:EGAT:VIEW:BAND:VID:AUTO switch_com
Query
SWE:EGAT:VIEW:BAND:VID:AUTO?
Response
switch_res
Parameter
switch_com
Automatic setting
OFF|0
Disables the automatic setting.
ON|1
Enables the automatic setting.
switch_res
Automatic setting
0
Automatic setting Off.
1
Automatic setting On.
Details
This command is not available when Gate View is set to Off.
Example of Use
To enable the automatic setting for VBW.
SWE:EGAT:VIEW:BAND:VID:AUTO ON
SWE:EGAT:VIEW:BAND:VID:AUTO?
> 1