Anritsu MS2840A - :STATus:OPERation:ENABle <integer>; :STATus:OPERation:ENABle?

2.20 OPERation Status Register
2-981
2
SCPI Device Message Details
:STATus:OPERation:ENABle <integer>
Operation Status Register Enable
Function
This command sets the event enable register of the OPERation status
register.
Command
:STATus:OPERation:ENABle <integer>
Parameter
<integer>
Total byte of event enable register
Resolution 1
Range 0 to 65535
Details
This command is available only in the SCPI mode.
Example of Use
To set the event enable register of the OPERation status register to 16.
STAT:OPER:ENAB 16
:STATus:OPERation:ENABle?
Operation Status Register Enable Query
Function
This command queries the event enable register of the OPERation status
register.
Query
:STATus:OPERation:ENABle?
Response
<integer>
Parameter
<integer>
Total byte of event enable register
Resolution 1
Range 0 to 65535