Anritsu MS2840A - [:SENSe]:TOI:ZSPan:SWEep:TIME <time>

Chapter 2 SCPI Device Message Detail
2-838
[:SENSe]:TOI:ZSPan:SWEep:TIME <time>
TOI Zero Span Measurement Sweep Time
Function
This command sets the sweep time for the Zero Span Measurement in
the TOI measurement.
Command
[:SENSe]:TOI:ZSPan:SWEep:TIME <time>
Parameter
<time>
Sweep time of Zero Span Measurement in the
TOI measurement.
Range 1
µ
s to 1000 s
Suffix code NS,US,MS,S
S is used when the suffix code is omitted.
Default
[MS269xA]
10 ms (MS2690A)
135 ms (MS2691A)
265 ms (MS2692A)
[MS2830A]
1 ms (Option 040)
2 ms (Option 041)
4 ms (Option 043)
89 ms (Option 044)
86 ms (Option 045)
[MS2840A]
1 ms (Option 040)
2 ms (Option 041)
89 ms (Option 044)
86 ms (Option 046)
Example of Use
To set the sweep time for the Zero Span Measurement.
TOI:ZSP:SWE:TIME 0.1