Anritsu MS2840A - BNDSP;BNDSP?

Chapter
４
Native Device Message Details
4-34
BNDSP/BNDSP?
Frequency Band Mode
Function
This command sets the frequency band path. The frequency at which the
path is switched to the preselector band or a path that does not pass
through the preselector can be set with this function.
Command
BNDSP mode
Query
BNDSP?
Response
mode
Parameter
mode
Frequency band mode
[MS269xA]
NORMAL
Sets the frequency to be switched to the
preselector band to 6.0 GHz.
OFF
Same as
NORMAL
SPURIOUS
Sets the frequency to be switched to the
preselector band to 3.0 GHz.
ON
Same as
SPURIOUS
[MS2830A-041/043/044/045], [MS2840A-041/044/046]
NORMAL
Sets the frequency to be switched to the
preselector band to 4.0 GHz.
OFF
Same as
NORMAL
SPURIOUS
Sets the frequency to be switched to the
preselector band to 3.5 GHz.
ON
Same as
SPURIOUS
Details
[MS269xA]
This command is not available when the Option 003/103 Preselector
lower limit frequency extension option is not installed.
[MS2830A], [MS2840A]
This command is not available for Option 040 3.6 GHz Signal
Analyzer.