Anritsu MS2840A - [:SENSe]:ACPower[:STATe] ON|OFF|1|0; :CALCulate:ACPower[:STATe] ON|OFF|1|0

2.9 ACP
2-353
2
SCPI Device Message Details
[:SENSe]:ACPower[:STATe] ON|OFF|1|0
Measure Adjacent Channel Power
Function
This command executes Adjacent Channel Power measurement.
Command
[:SENSe]:ACPower[:STATe] <switch>
Parameter
<switch>
ACP measurement On/Off
ON|1
Sets ACP measurement to On.
OFF|0
Sets ACP measurement to Off (Default).
Example of Use
To set the ACP measurement to On.
ACP ON
Related command
This command has the same function as the following command.
:CALCulate:ACPower[:STATe]
:CALCulate:ACPower[:STATe] ON|OFF|1|0
Measure Adjacent Channel Power
Function
This command executes Adjacent Channel Power measurement.
Refer to
[:SENSe]:ACPower[:STATe].
Related command
This command has the same function as the following command.
[:SENSe]:ACPower[:STATe]