Anritsu MS2840A - [:SENSe]:ACPower:CARRier[1]:RCARrier:METHod?

2.9 ACP
2-359
2
SCPI Device Message Details
[:SENSe]:ACPower:CARRier[1]:RCARrier:METHod?
Adjacent Channel Power Reference Query
Function
This command queries the reference of the relative level display for
Adjacent Channel Power measurement.
Query
[:SENSe]:ACPower:CARRier[1]:RCARrier:METHod?
Response
<method>
Parameter
<method>
Reference method for the relative level display
for ACP measurement.
STOT
Sets the integral power on the whole screen to
the reference (Span Total method).
CTOT
Sets the total value of all the carrier power to
the reference (Carrier Total method)(Default)
BSID
Upper offset uses the carrier power of the
biggest carrier number as a reference, and the
lower one uses the carrier power of the smallest
carrier number as a reference (Both Sides of
Carriers method).
CSEL
Uses the carrier selected in Carrier Select as a
reference.
Example of Use
To query ACP measurement method.
ACP:CARR:RCAR:METH?
> CTOT
Related command
This command has the same function as the following command.
:CALCulate:ACPower:CARRier[1]:RCARrier:METHod?