Chapter
４
Native Device Message Details
4-182
MZWF/MZWF?
Zone Marker Width (by Frequency)
Function
This command sets the zone marker width using frequency.
Command
MZWF freq,marker
Query
MZWF? marker
Response
freq
Returns a value in Hz units, without a suffix code.
Parameter
freq
Zone marker frequency
Range 0.01 Hz to set span width
Resolution 0.01 Hz
Suffix code HZ, KHZ, KZ, MHZ, MZ, GHZ, GZ
Hz is used when omitted.
marker
Marker type
1
Marker 1
2
Marker 2
3
Marker 3
4
Marker 4
5
Marker 5
6
Marker 6
7
Marker 7
8
Marker 8
9
Marker 9
10
Marker 10
When omitted: Active marker
Details
This command is not available in the following case:
•
During the Spurious Emission measurement AND when Displayed
Segment Mode is set to Auto.
•
During the Spectrum Emission Mask measurement.
To Next Page
Loading...
