Anritsu MS2840A - [:SENSe]:AVERage:COUNt?

2.6 Trace
2-193
2
SCPI Device Message Details
[:SENSe]:AVERage:COUNt?
Average Count Query
Function
This command queries the storage count.
Query
[:SENSe]:AVERage:COUNt?
Response
<integer>
Parameter
<integer>
Storage count
Range 2 to 9999
Example of Use
To query the storage count.
AVER:COUN?
> 110
Command
This command has the same function as the following commands.
[:SENSe]:ACPower:AVERage:COUNt?
[:SENSe]:CHPower:AVERage:COUNt?
[:SENSe]:OBWidth:AVERage:COUNt?
[:SENSe]:SEMask:AVERage:COUNt?
[:SENSe]:BPOWer|:TXPower:AVERage:COUNt?