Anritsu MS2840A - :CALCulate:ACPower:CARRier[1]:LIST:WIDTh <freq>; [:SENSe]:ACPower:CARRier[1]:LIST:WIDTh?

2.9 ACP
2-373
2
SCPI Device Message Details
Example of Use
To set the frequency interval among carriers to 12.3 MHz.
ACP:CARR:WIDT 12300000
Related command
This command has the same function as the following command.
:CALCulate:ACPower:CARRier[1]:LIST:WIDTh
:CALCulate:ACPower:CARRier[1]:LIST:WIDTh <freq>
Adjacent Channel Power Carrier Spacing
Function
This command sets the frequency interval among carriers for Adjacent
Channel Power measurement.
Refer to
[:SENSe]:ACPower:CARRier[1]:LIST:WIDTh.
Related command
This command has the same function as the following command.
[:SENSe]:ACPower:CARRier[1]:LIST:WIDTh
[:SENSe]:ACPower:CARRier[1]:LIST:WIDTh?
Adjacent Channel Power Carrier Spacing Query
Function
This command queries the frequency interval among carriers for
Adjacent Channel Power measurement.
Query
[:SENSe]:ACPower:CARRier[1]:LIST:WIDTh?
Response
<freq>
Parameter
<freq>
Frequency interval among carriers
Range 0 to 1000000000 Hz
Resolution 1 Hz
Suffix code None. Value is returned in Hz units.