Anritsu MS2840A - TRIG:HOLD:STAT;TRIG:HOLD:STAT?

Chapter
４
Native Device Message Details
4-350
TRIG:HOLD:STAT/TRIG:HOLD:STAT?
Trigger Hold On/Off
Function
This command sets On/Off the function to disable trigger input for a set
time, from the first trigger input until the next trigger input.
Command
TRIG:HOLD:STAT switch_com
Query
TRIG:HOLD:STAT?
Response
Switch_res
Parameter
switch_com
Trigger Hold On/Off
ON|1
Sets the Trigger Hold function to On.
OFF|0
Sets the Trigger Hold function to Off.
switch_res
Trigger Hold On/Off
1
Trigger Hold function is On.
0
Trigger Hold function is Off.
Details
This command is not available for MS269x Series.
The Trigger (On/Off) function is automatically set to On when this
function is set to On.
Example of Use
To set the trigger input disable time setting to On.
TRIG:HOLD:STAT ON
TRIG:HOLD:STAT?
> 1