Anritsu MS2840A - FULLSPAN

Chapter
４
Native Device Message Details
4-104
G
Band G (140.0 to 220.0 GHz, 22+)
Y
Band Y (170.0 to 260.0 GHz, 26+)
J
Band J (220.0 to 325.0 GHz, 33+)
Details
This function is available when Option 044/045 is installed for MS2830A.
This function is available when Option 044/046 is installed for MS2840A.
Example of Use
To set the external mixer band to Band U.
FULBAND U
FULBAND?
> U
FULLSPAN
Full Span
Function
This command sets the frequency span to the maximum.
Command
FULLSPAN
Details
This command is not available in the following cases:
•
During the Spectrum Emission Mask measurement.
•
During the Spurious Emission measurement.
Example of Use
To set the frequency span to the maximum.
FULLSPAN