Chapter 2 SCPI Device Message Details
2-626
[:SENSe]:SEMask:SWEep[1]:TIME:AUTO:MODE NORMal|FAST
Spectrum Emission Mask Auto Sweep Time Select
Function
This command sets the sweep mode (Normal/Fast) when the automatic
sweep time setting function is enabled for measuring of the reference
power during Spectrum Emission Mask measurement.
Command
[:SENSe]:SEMask:SWEep[1]:TIME:AUTO:MODE <mode>
Parameter
<mode>
Normal/Fast of sweep time
NORMal
Normal sweep mode
FAST
High-speed sweep mode
Example of Use
To set FAST for the sweep mode when the automatic sweep time setting
function is enabled for measuring the reference power.
SEM:SWE:TIME:AUTO:MODE FAST
To Next Page
Loading...
