Anritsu MS2840A - [:SENSe]:SEMask:OFFSet[1]:LIST:RLEVel <ampl_1>[,<ampl_2>[,<ampl_3>[,<ampl_4>[,<ampl_5>[,<ampl_6>[,<ampl_7>[,<ampl_8>[,<ampl_9>[,<ampl_10>[,<ampl_11>[,<ampl_12>]]]]]]]]]]]

2.13 Spectrum Emission Mask
2-653
2
SCPI Device Message Details
[:SENSe]:SEMask:OFFSet[1]:LIST:RLEVel
<ampl_1>[,<ampl_2>[,<ampl_3>[,<ampl_4>[,<ampl_5>[,<ampl_6>[,<ampl_7
>[,<ampl_8>[,<ampl_9>[,<ampl_10>[,<ampl_11>[,<ampl_12>]]]]]]]]]]]
Spectrum Emission Mask Offset Reference Level
Function
This command sets the reference level of the offset for Spectrum
Emission Mask measurement.
Command
[:SENSe]:SEMask:OFFSet[1]:LIST:RLEVel <ampl_n>
Parameter
<ampl_n>
Reference level of Offset-n
Range Value equivalent to
−
120 to +50 dBm
Resolution 0.01 dB
Suffix code DBM,DM
dBm is used when omitted.
Example of Use
To set the reference level of the offset to 0 dBm.
SEM:OFFS:LIST:RLEV 0,0,0,0,0,0,0,0,0,0,0,0