Anritsu MS2840A - :CALCulate:SPURious[:RANGe][:LIST]:CORRection:RECall <segment>,<filename>[,<device>]

2.14 Spurious Emission Measurement Function
2-771
2
SCPI Device Message Details
:CALCulate:SPURious[:RANGe][:LIST]:CORRection:RECall
<segment>,<filename>[,<device>]
Recall Correction Table
Function
This command selects the correction table to use in a segment.
Command
:CALCulate:SPURious[:RANGe][:LIST]:CORRection:RECall
<segment>,<filename>[,<device>]
Parameter
<segment>
Segment
Range 1 to 20
Resolution 1
<filename>
Name of File
Character string within 32 characters enclosed
by double quotation marks (" ") or single
quotation marks (' ') (Not including an
extension).
The following characters are not available:
\ / : * ? “ ” ‘ ’ < > |
<device>
Name of Drive
A,B,D,E,F,...
D drive is used when omitted.
Example of Use
To select the correction table of a file named TEST in the internal HDD
or SSD.
CALC:SPUR:CORR:REC 1,"TEST",D