Anritsu MS2840A - :CALCulate:LLINe[1]|2|3|4|5|6:ENVelope:SHAPe?

Chapter 2 SCPI Device Message Details
2-234
:CALCulate:LLINe[1]|2|3|4|5|6:ENVelope:SHAPe?
Envelope Shape Query
Function
This command queries the shape setting of Limit Lines to be
automatically created.
Query
:CALCulate:LLINe[1]|2|3|4|5|6:ENVelope:SHAPe?
Response
<mode>
Parameter
<mode>
Shape of the Limit Line
SQU
Connects Limit Points by vertical and horizontal
lines.
SLOP
Connects Limit Points by straight lines.
(Default)
Example of Use
To query the shape setting of the Limit Lines.
CALC:LLIN:ENV:SHAP?
> SLOP