2
SCPI Device Message Details
[:SENSe]:CHPower:FILTer[:RRC][:STATe]?
Channel Power Filter Type Query
Function
This command queries filter type for Channel Power measurement.
Query
[:SENSe]:CHPower:FILTer[:RRC][:STATe]?
Response
<filter>
Parameter
<filter>
Filter type
0
Rectangle filter
1
Root Nyquist filter
Example of Use
To query the filter type.
CHP:FILT?
> 1
Related command
This command has the same function as the following commands.
[:SENSe]:CHPower:FILTer:TYPE?
:CALCulate:CHPower:FILTer[:RRC][:STATe]?
:CALCulate:CHPower:FILTer[:RRC][:STATe]?
Channel Power Filter Type Query
Function
This command queries filter type for Channel Power measurement.
Refer to
[:SENSe]:CHPower:FILTer[:RRC][:STATe]?.
Related command
This command has the same function as the following commands.
[:SENSe]:CHPower:FILTer:TYPE?
[:SENSe]:CHPower:FILTer[:RRC][:STATe]?