Chapter 2 SCPI Device Message Details
2-376
[:SENSe]:ACPower:OFFSet[1]:LIST:STATe?
Adjacent Channel Power Offset Query
Function
This command queries the On/Off state of the offset channel for Adjacent
Channel Power measurement.
Query
[:SENSe]:ACPower:OFFSet[1]:LIST:STATe?
Response
<switch_1>,<switch_2>,<switch_3>
Parameter
<switch_n>
Measurement channel “n” On/Off
1
Measures the offset channel “n”.
0
Does not measure the offset channel “n”.
Example of Use
To query the On/Off state of the offset channel.
ACP:OFFS:LIST:STAT?
> 1,1,1
Related command
This command has the same function as the following command.
:CALCulate:ACPower:OFFSet[1]:LIST:STATe?
:CALCulate:ACPower:OFFSet[1]:LIST:STATe?
Adjacent Channel Power Offset Query
Function
This command queries the On/Off state of the offset channel for Adjacent
Channel Power measurement.
Refer to
[:SENSe]:ACPower:OFFSet[1]:LIST:STATe?.
Related command
This command has the same function as the following command.
[:SENSe]:ACPower:OFFSet[1]:LIST:STATe?
To Next Page
Loading...
