Anritsu MS2840A - [:SENSe]:BPOWer|:TXPower[:STATe]?; :CALCulate:BPOWer|:TXPower[:STATe]?

2.10 Burst Average Power
2-447
2
SCPI Device Message Details
[:SENSe]:BPOWer|:TXPower[:STATe]?
Measure Burst Average Power Query
Function
This command queries the On/Off state of the Burst Average Power
measurement.
Query
[:SENSe]:BPOWer|:TXPower[:STATe]?
Response
<switch>
Parameter
<switch>
Burst Average Power measurement On/Off
1
On
0
Off
Example of Use
To query the On/Off state of the Burst Average Power measurement.
BPOW?
> 1
Related command
This command has the same function as the following command.
:CALCulate:BPOWer|:TXPower[:STATe]?
:CALCulate:BPOWer|:TXPower[:STATe]?
Measure Burst Average Power Query
Function
This command queries the setting of Burst Average Power measurement.
Refer to
[:SENSe]:BPOWer|:TXPower[:STATe]?.
Related command
This command has the same function as the following command.
[:SENSe]:BPOWer|:TXPower[:STATe]?