Anritsu MS2840A - [:SENSe]:BANDwidth|:BWIDth:VIDeo:MODE VIDeo|POWer

Chapter 2 SCPI Device Message Details
2-98
[:SENSe]:BANDwidth|:BWIDth:VIDeo:MODE VIDeo|POWer
Video Bandwidth Mode
Function
This command sets the video bandwidth (VBW) processing method.
Command
[:SENSe]:BANDwidth|:BWIDth:VIDeo:MODE <method>
Parameter
<method>
VBW processing method
VIDeo
Normal VBW
POWer
Power VBW (Default)
Details
This command is not available in the following cases:
•
When Detection is set to RMS.
•
During the Spectrum Emission Mask measurement.
Example of Use
To set the video bandwidth processing method when measuring the
reference power to Power VBW.
BAND:VID:MODE POW