Anritsu MS2840A - [:SENSe]:SPURious:ATTenuation?

2.14 Spurious Emission Measurement Function
2-745
2
SCPI Device Message Details
[:SENSe]:SPURious:ATTenuation?
Spurious Emission Attenuator Query
Function
This command queries the attenuator value of each segment.
Query
[:SENSe]:SPURious:ATTenuation?
Response
<rel_ampl_n>
Parameter
<rel_ampl_n>
Attenuator value of Segment n
Range 0 to 60 dB
Resolution
[MS269xA]
2 dB
[MS2830A]
,
[MS2840A]
2 dB or 10 dB
Refer to “Table 2.4.2-3 Resolution of Input Attenuator” in the
MS2830A/MS2840A Signal Analyzer Operation Manual
(Spectrum Analyzer Function Operation)
.
Suffix code None. Value is returned in dB units.
Example of Use
To query the attenuator value.
SPUR:ATT?
>
10,10,12,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10,10
,10