Anritsu MS2840A - [:SENSe]:SPURious[:RANGe][:LIST]:PEAK:THReshold <real_1>,<real_2>,<real_3>,<real_4>,<real_5>,<real_6>,<real_7>,<real_8>,<real_9>,<real_10>,<real_11>,<real_12>,<real_13>,<real_14>,<real_15>,<real_16>,<real_17>,<real_18>,<real_19>,<real_20>

Chapter 2 SCPI Device Message Detail
2-780
[:SENSe]:SPURious[:RANGe][:LIST]:PEAK:THReshold
<real_1>,<real_2>,<real_3>,<real_4>,<real_5>,<real_6>,<real_7>,<real_8>,<
real_9>,<real_10>,<real_11>,<real_12>,<real_13>,<real_14>,<real_15>,<rea
l_16>,<real_17>,<real_18>,<real_19>,<real_20>
Spurious Emission Search Threshold Level
Function
This command sets the spurious search threshold when Result Type is
Peaks.
Command
[:SENSe]:SPURious[:RANGe][:LIST]:PEAK:THReshold <real_n>
Parameter
<real_n>
Spurious search threshold
Range –200 dBm to 50 dBm
Resolution 0.01 dB
Suffix Code DBM,DM
Default –90 dBm
Example of Use
To set the spurious search threshold.
SPUR:PEAK:THR
−70,-70,-90,-90,-90,-90,-90,-90,-90,-90,-90,-90,-90,-90,
-90,-90,-90,-90,-90,-90