Anritsu MS2840A - [:SENSe]:TOI:ZSPan:BANDwidth|BWIDth[:RESolution]?

2.15 Setting the TOI Measurement Functions
2-835
2
SCPI Device Message Details
[:SENSe]:TOI:ZSPan:BANDwidth|BWIDth[:RESolution]?
TOI Zero Span Measurement Resolution Bandwidth Query
Function
This command queries the resolution bandwidth for the Zero Span
Measurement in the TOI measurement.
Query
[:SENSe]:TOI:ZSPan:BANDwidth|BWIDth[:RESolution]?
Response
<freq>
Parameter
<freq>
Resolution bandwidth for the Zero Span
Measurement in the TOI measurement
[MS269xA]
Range/Resolution 30 Hz to 31.25 MHz
Value is returned in any of 30 Hz to 3 MHz (1-3
sequence), 50 kHz, 5 MHz, 10 MHz, 20 MHz,
and 31.25 MHz.
[MS2830A]
，
[MS2840A]
Range/Resolution 30 Hz to 31.25 MHz
Value is returned in any of 30 Hz to 3 MHz (1-3
sequence), 500 Hz, 50 kHz, 2 MHz, 5 MHz, 10
MHz, 20 MHz or 31.25 MHz.
[Common]
Suffix code None. Value is returned in Hz units.
Example of Use
To query the resolution bandwidth for the Zero Span Measurement.
TOI:ZSP:BAND?
> 1000000