Anritsu MS2840A - :MEASure:OBWidth:FERRor?; :CALCulate:OBWidth:MARKer:AOFF

2.12 OBW
2-545
2
SCPI Device Message Details
:MEASure:OBWidth:FERRor?
Occupied Bandwidth Measure
Function
This command performs the measurement of OBW and outputs the
difference between the center frequency of Occupied Bandwidth and the
center frequency.
It achieves the same result as when commands are sent in the order of
:CONFigure:OBWidth
:INITiate:OBWidth
:FETCh:OBWidth:FERRor?
:CALCulate:OBWidth:MARKer:AOFF
All Marker Off
Function
This command sets all the markers to Off.
Refer to
:CALCulate:MARKer:AOFF.
Related command
This command has the same function as the following commands.
:CALCulate:MARKer:AOFF
:CALCulate:ACPower:MARKer:AOFF
:CALCulate:CHPower:MARKer:AOFF
:CALCulate:BPOWer|:TXPower:MARKer:AOFF