Anritsu MS2840A - [:SENSe]:TOI:ZSPan:SWEep:TIME:AUTO?

2.15 Setting the TOI Measurement Functions
2-841
2
SCPI Device Message Details
[:SENSe]:TOI:ZSPan:SWEep:TIME:AUTO?
TOI Zero Span Measurement Sweep Time Auto/Manual Query
Function
This command queries whether the automatic setting of the sweep time
for the Zero Span Measurement in the TOI measurement is on or off.
Query
[:SENSe]:TOI:ZSPan:SWEep:TIME:AUTO?
Response
<switch>
Parameter
<switch>
Automatic setting of the sweep time for the Zero
Span Measurement in the TOI measurement.
ON|1
Turns on the automatic setting of the sweep time
for the Zero Span Measurement in the TOI
measurement.
OFF|0
Turns off the automatic setting of the sweep
time for the Zero Span Measurement in the TOI
measurement.
Example of Use
To query whether the automatic setting of the sweep time for the Zero
Span Measurement in the TOI measurement is on or off.
TOI::ZSP:SWE:TIME:AUTO?
> 1