Anritsu MS2840A - [:SENSe]:SEMask:BANDwidth[1]:VIDeo:MODE VIDeo|POWer

Chapter 2 SCPI Device Message Details
2-614
[:SENSe]:SEMask:BANDwidth[1]:VIDeo:MODE VIDeo|POWer
Spectrum Emission Mask Video Bandwidth Mode
Function
This command sets the processing method for the video bandwidth
(VBW) when measuring the reference power for Spectrum Emission
Mask measurement.
Command
[:SENSe]:SEMask:BANDwidth[1]:VIDeo:MODE <method>
Parameter
<method>
Processing method for VBW
VIDeo
Normal VBW
POWer
Power VBW
Example of Use
To set the processing method for the video bandwidth when measuring
the reference power to Power VBW.
SEM:BAND:VID:MODE POW