Chapter 2 SCPI Device Message Details
2-372
Related command
This command has the same function as the following command.
:CALCulate:ACPower:CARRier[1]:COUNt?
:CALCulate:ACPower:CARRier[1]:COUNt?
Adjacent Channel Power Carrier Number Query
Function
This command queries the carrier number for Adjacent Channel Power
measurement.
Refer to
[:SENSe]:ACPower:CARRier[1]:COUNt?.
Related command
This command has the same function as the following command.
[:SENSe]:ACPower:CARRier[1]:COUNt?
[:SENSe]:ACPower:CARRier[1]:LIST:WIDTh <freq>
Adjacent Channel Power Carrier Spacing
Function
This command sets the frequency interval among carriers for Adjacent
Channel Power measurement.
Command
[:SENSe]:ACPower:CARRier[1]:LIST:WIDTh <freq>
Parameter
<freq>
Frequency interval among carriers
Range 0 to 1000000000 Hz
Resolution 1 Hz
Suffix code HZ,KHZ,KZ,MHZ,MZ,GHZ,GZ
Hz is used when omitted.
Default 5 MHz
Details
This command is not available when ACP Reference is set to the
following:
•
Span Total
To Next Page
Loading...
