Anritsu MS2840A - [:SENSe]:SEMask:FILTer:TYPE RECT|NYQuist|RNYQuist

2.13 Spectrum Emission Mask
2-641
2
SCPI Device Message Details
[:SENSe]:SEMask:FILTer:TYPE RECT|NYQuist|RNYQuist
Spectrum Emission Mask Reference Filter Type
Function
This command selects the filter type when measuring the reference
power for Spectrum Emission Mask measurement.
Command
[:SENSe]:SEMask:FILTer:TYPE <type>
Parameter
<type>
Filter type
RECT
Rectangle Filter
NYQuist
Nyquist Filter
RNYQuist
Root Nyquist Filter
Details
This command is not available when Reference Mode is set to either of
the following:
•
Peak
•
Fix
Related command
This command has the same function as the following command.
[:SENSe]:SEMask:FILTer[:RRC][:STATe]
Example of Use
To set the filter type when measuring the reference power to Root
Nyquist Filter.
SEM:FILT:TYPE RNYQ