Anritsu MS2840A - :DISPlay:WINDow[1]:TRACe:Y[:SCALe][:LOGarithmic] <lines>

2.2 Level
2-69
2
SCPI Device Message Details
Example of Use
To query the scale magnification.
DISP:WIND:TRAC:Y:LIN:PDIV?
> 5
:DISPlay:WINDow[1]:TRACe:Y[:SCALe][:LOGarithmic] <lines>
Log Scale Line
Function
This command sets the number of Y-axis scale segments in Log scale
mode.
Command
:DISPlay:WINDow[1]:TRACe:Y[:SCALe][:LOGarithmic] <lines>
Parameter
<lines>
Number of Y-axis scale segments
10
10 segments (Default value)
12
12 segments
Details
This command is available only in Log scale mode.
Example of Use
To set the number of Y-axis scale segments in Log scale mode to 12.
DISP:WIND:TRAC:Y 12