Anritsu MS2840A - OBWXDB;OBWXDB?; PCF

Chapter
４
Native Device Message Details
4-185
4
Native Device Message Details
OBWXDB/OBWXDB?
OBW X dB Value
Function
This command sets the Occupied Frequency Bandwidth (X dB) condition.
Command
OBWXDB level
Query
OBWXDB?
Response
level
No suffix code. Value is returned in dB units.
Parameter
level
X dB
Range 0.01 to 100.00 dB
Resolution 0.01 dB
Suffix Code DB
dB is used when omitted.
Example of Use
To set X dB condition to 12.34 dB.
OBWXDB 12.34
OBWXDB?
> 12.34
PCF
Peak to Center Frequency
Function
This command sets the maximum peak point to the center frequency.
Command
PCF
Example of Use
To set the maximum peak point to the center frequency:
PCF