Anritsu MS2840A - :CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence <integer>; :CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence?

2.9 ACP
2-443
2
SCPI Device Message Details
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence <integer>
Relative To
Function
This command sets the reference marker when the marker mode is set to
Delta.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence
<integer>
Related command
This command has the same function as the following commands.
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerenc
e
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerenc
e
:CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:
REFerence
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence?
Relative To
Function
This command queries the reference marker reading when the marker
mode is set to Delta.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence?
Related command
This command has the same function as the following commands.
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerence?
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerenc
e?
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10:REFerenc
e?
:CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:
REFerence?