Anritsu MS2840A - :CALCulate:MARKer:SLINe[:STATe] OFF|ON|0|1

2.4 Marker
2-123
2
SCPI Device Message Details
:CALCulate:MARKer:SLINe[:STATe] OFF|ON|0|1
Spot Line
Function
This command selects the marker line display in spot marker On/Off.
Command
:CALCulate:MARKer:SLINe[:STATe] <switch>
Parameter
<switch>
Marker list display On/Off
ON|1
Displays the marker line.
OFF|0
Hides the marker line.
Details
This command is not available during Spurious Emission measurement
and when Displayed Segment Mode is Auto.
Not available during Spectrum Emission Mask measurement.
Example of Use
To display the marker line.
CALC:MARK:SLIN ON