Anritsu MS2840A - [:SENSe]:OBWidth[:STATe] ON|OFF|1|0; [:SENSe]:OBWidth[:STATe]?

Chapter 2 SCPI Device Message Details
2-530
[:SENSe]:OBWidth[:STATe] ON|OFF|1|0
Measure Occupied Bandwidth
Function
This command executes Occupied Bandwidth measurement.
Command
[:SENSe]:OBWidth[:STATe] <switch>
Parameter
<switch>
OBW measurement On/Off
ON|1
Sets OBW measurement to On.
OFF|0
Sets OBW measurement to Off.
Example of Use
To set OBW measurement to On.
OBW ON
Related command
This command has the same function as the following command.
:CALCulate:OBWidth[:STATe] ON|OFF|1|0
[:SENSe]:OBWidth[:STATe]?
Measure Occupied Bandwidth Query
Function
This command queries the On/Off state of the Occupied Bandwidth
measurement setting.
Command
[:SENSe]:OBWidth[:STATe]?
Parameter
<switch>
OBW measurement On/Off
1
On
0
Off
Example of Use
To query the On/Off state of the OBW measurement setting.
OBW?
> 1