Anritsu MS2840A - [:SENSe]:TOI:ZSPan:BANDwidth|BWIDth[:RESolution]:AUTO?

2.15 Setting the TOI Measurement Functions
2-837
2
SCPI Device Message Details
[:SENSe]:TOI:ZSPan:BANDwidth|BWIDth[:RESolution]:AUTO?
TOI Zero Span Measurement Resolution Bandwidth Auto/Manual Query
Function
This command queries whether the automatic setting of the resolution
bandwidth for the Zero Span Measurement in the TOI measurement is
on or off.
Query
[:SENSe]:TOI:ZSPan:BANDwidth|BWIDth[:RESolution]:AUTO?
Response
<switch>
Parameter
<switch>
Automatic setting of the resolution bandwidth
for the Zero Span Measurement in the TOI
measurement
ON|1
Turns on the automatic setting of the resolution
bandwidth for the Zero Span Measurement in
the TOI measurement.
OFF|0
Turns off the automatic setting of the resolution
bandwidth for the Zero Span Measurement in
the TOI measurement.
Example of Use
To query whether the automatic setting of the resolution bandwidth for
the Zero Span Measurement in the TOI measurement is on or off.
TOI:ZSP:BAND:AUTO?
> 1