Anritsu MS2840A - [:SENSe]:SEMask:OFFSet[1]:LIST:STOP:RCARrier?

Chapter 2 SCPI Device Message Details
2-672
[:SENSe]:SEMask:OFFSet[1]:LIST:STOP:RCARrier?
Spectrum Emission Mask Offset Stop Frequency Limit Level Query
Function
This command sets the relative level upper limit of the offset stop
frequency for Spectrum Emission Mask measurement.
Query
[:SENSe]:SEMask:OFFSet[1]:LIST:STOP:RCARrier?
Response
<ampl_n>
Parameter
<ampl_n>
Relative level upper limit of Offset-n stop
frequency
Range –200 to +50 dB
Resolution 0.01 dB
Suffix code None. Value is returned in dB units.
Example of Use
To query the absolute level upper limit of the stop frequency of the offset.
SEM:OFFS:LIST:STOP:RCAR?
>
-30.00,-30.00,-30.00,-30.00,-30.00,-30.00,-30.00,-30.00,
-30.00,-30.00,-30.00,-30.00
Related command
This command has the same function as the following command.
:CALCulate:SEMask:OFFSet[1]:LIST:STOP:RCARrier?