Anritsu MS2840A - [:SENSe]:SWEep:EGATe:VIEW:FREQuency?

2.7 Sweep/Trigger/Gate
2-315
2
SCPI Device Message Details
[:SENSe]:SWEep:EGATe:VIEW:FREQuency?
Gate View
Frequency Query
Function
This commands queries the center frequency of the gate view.
Command
[:SENSe]:SWEep:EGATe:VIEW:FREQuency?
Response
<freq>
Parameter
<freq>
Center Frequency
Range
[MS269xA]
–100 MHz to 6.05 GHz (MS2690A)
–100 MHz to 13.6 GHz (MS2691A)
–100 MHz to 26.6 GHz (MS2692A)
[MS2830A]
–100 MHz to 3.7 GHz (Option 040)
–100 MHz to 6.1 GHz (Option 041)
–100 MHz to 13.6 GHz (Option 043)
–100 MHz to 26.6 GHz (Option 044)
–100 MHz to 43.1 GHz (Option 045)
[MS2840A]
–100 MHz to 3.7 GHz (Option 040)
–100 MHz to 6.1 GHz (Option 041)
–100 MHz to 26.6 GHz (Option 044)
–100 MHz to 44.6 GHz (Option 046)
Resolution 1 Hz
Suffix code None. Value is returned in Hz units.
Default
[MS269xA]
3.00 GHz (MS2690A)
6.75 GHz (MS2691A)
13.25 GHz (MS2692A)
[MS2830A]
1.8 GHz (Option 040)
3.0 GHz (Option 041)
6.75 GHz (Option 043)
13.25 GHz (Option 044)
21.5 GHz (Option 045)
[MS2840A]
1.8 GHz (Option 040)
3.0 GHz (Option 041)
13.25 GHz (Option 044)
22.25 GHz (Option 046)
Example of Use
To query the center frequency.
SWE:EGAT:VIEW:FREQ?
> 123456