Anritsu MS2840A - [:SENSe]:OBWidth:XDB <rel_ampl>

2.12 OBW
2-537
2
SCPI Device Message Details
[:SENSe]:OBWidth:XDB <rel_ampl>
OBW X dB Value
Function
This command sets the Occupied Frequency Bandwidth (X dB) condition.
Command
[:SENSe]:OBWidth:XDB <rel_ampl>
Parameter
<rel_ampl>
X dB
Range 0.01 to 100.00 dB
Resolution 0.01 dB
Suffix code DB
dB is used even when omitted.
Default 25.00 dB
Example of Use
To set the X dB condition to 12.34 dB.
OBW:XDB 12.34
Related command
This command has the same function as the following command.
:CALCulate:OBWidth:XDB