Chapter 2 SCPI Device Message Details
2-642
[:SENSe]:SEMask:FILTer:TYPE?
Spectrum Emission Mask Reference Filter Type Query
Function
This command queries the filter type when measuring the reference
power for Spectrum Emission Mask measurement.
Query
[:SENSe]:SEMask:FILTer:TYPE?
Response
<type>
Parameter
<type>
Filter type
RECT
Rectangle Filter
NYQ
Nyquist Filter
RNYQ
Root Nyquist Filter
Details
This command is not available when Reference Mode is set to either of
the following:
•
Peak
•
Fix
Related command
This command has the same function as the following command.
[:SENSe]:SEMask:FILTer[:RRC][:STATe]?
Example of Use
To query the filter type when measuring the reference power.
SEM:FILT:TYPE?
> RNYQ
To Next Page
Loading...
